AG3D LabAG3D Lab
$6.99 Buy: $6.99 Or get it on Cults3D
Rack-mount your Raspberry Pi boards in a 10-inch mini rack. There are four trays: 1U single, 1U dual, 2U single and 2U dual.
Each tray uses the Pi's 58 x 49 mm hole pattern, with M2.5 standoffs and nut pockets. The front is open, so ports stay reachable, and the floor is vented. Dual trays hold two boards with a 14 mm gap (126 mm outer span).
The ears follow the common 10-inch layout: 236.525 mm hole centres, a 253 mm panel and slotted M6 / 10-32 holes. You'll need a print bed of about 256 mm; on a 220 mm bed the panel only fits diagonally.
The download includes STEP, IGES and STL for every tray, a 5-sheet PDF with board and rack dimensions and their sources, and the parametric Python source. It pairs with the 10-inch rack panel kit and is included in the Homelab Bundle.
Not affiliated with or endorsed by Raspberry Pi Ltd.
Digital files only; nothing ships. You get a download link right after checkout. Images on the Cults3D listing are 3D renders.
Questions or feedback? Contact us anytime.